Applicable scenarioses
Personnel barrier (temperature measurement), intelligent gate (temperature measurement), Ministry of Public Security personnel verification (temperature measurement), etc
Main characteristics
·Support binocular live detection
·Support facial tracking and exposure for personnel movement in strong backlighting environments
·Unique facial recognition algorithm that recognizes faces with a recognition time of less than 0.5 seconds
·Built in domestic CPU
·Using LINUX operating system, the system is stable
·H. The 265 encoding format video stream is directly connected to storage devices such as NVR through ONVIF protocol and GB28181 protocol
·Support local storage with TF card, continuous storage of images for 1 year, continuous storage of videos for 1 month or longer (depending on the optional TF card capacity)
·The mean time between failures (MTBF) of the host is greater than 50000 hours
·Support mid-range temperature measurement and high temperature alarm
·Support temperature data interface protocol docking
·Supports over 24000 facial comparison databases and 160000 recognition records
·Rich interface protocols, supporting TCP/IP, UDP, RTP, RTSP, RTCP, HTTP, DNS, DDNS, DHCP, SMTP, UPNP, MQTT protocols on various platforms such as Windows/Linux
·Rich hardware interfaces (I/O WG26、WG34 、RJ45 、USB、RS485）
·8-inch IPS full view high-definition display screen, with no ghosting or delay in images
·Automatic gain and white balance, allowing the true colors of the image to be naturally restored
·Built in video specific black light level sensor for low light recognition
·3D noise reduction and fog transmission technology make the image clearer and more delicate under low light conditions
·Support stream and I-frame interval settings
·Support partial blocking of video areas
·Support ROI encoding
·Automatic white balance and manual white balance are available
·Support exposure time setting
·Support settings
·Support 2D noise reduction and 3D noise reduction
·Support the setting of recording schedule time periods and upload methods
·Support video brightness, contrast, color tone, saturation, and gamma adjustment
·Support setting long automatic exposure time
·Support facial intelligent exposure and facial intelligent enhancement settings
Precautions
1. Temperature measuring equipment should be used in a room with no ventilation and a room temperature between 16 ℃ and 40 ℃;
2. Personnel entering indoors from a cold outdoor environment can affect temperature measurement accuracy;
3. The sensor temperature and ambient temperature need to be balanced after being turned on for 10 minutes before starting the test;
4. Ensure that there are no heating sources or air conditioning vents within a 3-meter range of the equipment;
5. It is necessary to leave the forehead unobstructed indoors for three minutes and ensure that the temperature stabilizes before conducting the forehead temperature test;
6. Exposure to certain factors will change the forehead temperature, such as shower, hair dryer, spray, etc;
When there is oil on the forehead, makeup, oxygen masks, or wrinkles in the elderly, the temperature read will be lower than the actual temperature;
8. The temperature read is the temperature at the projection locations, ensuring that there is no hair or clothing covering this area.
